Ivory Flat Pan Patio Cover Installed in Lacombe, LA
Southern Home Improvement Center (SHIC) completed a residential patio cover project in Lacombe, Louisiana, installing a Southern Shademaker heavy-duty non-insulated flat pan aluminum system. Finished in Ivory, the new structure measures approximately 9 ft. x 19 ft. and creates a defined covered area beside the home.
The completed project includes a full gutter system, finished valances and three 3 in. x 3 in. extruded aluminum posts. No fan beams were included in the installation, giving the underside of the cover a simple, streamlined appearance.
Project Details: Ivory Flat Pan Cover in Lacombe
This Lacombe project was planned around a compact outdoor area and a clean exterior finish. Based on the stated measurements, the approximately 9 ft. x 19 ft. footprint provides about 171 square feet of covered space while keeping the new structure proportionate to the residence.
The finished installation combines a light neutral color, a straightforward panel layout and clean structural lines for an outdoor addition that fits naturally alongside the home.
The Outdoor Area Before Installation
Before the new patio cover was installed, the home had an open concrete patio area beside the lower-level entry and below the raised deck. The existing slab established a practical footprint for the project, while the uncovered portion of the area remained exposed overhead.
The new structure was planned for this location to add a solid overhead cover while preserving entry access and working with the established exterior layout of the home.
A Compact Patio Cover with a Clean Exterior Profile
For this home, the completed patio cover creates overhead coverage along the side of the residence without introducing an oversized addition. Its approximate 9 ft. x 19 ft. dimensions suit the available slab area and maintain a balanced relationship with the existing exterior.
The Ivory finish gives the new installation a light, coordinated appearance. The same finish carries through the flat pan roof surface, visible edge components, gutter system and support posts, creating a consistent look across the completed structure.
The project does not rely on added decorative features or fan-beam sections. Instead, it is defined by a clean roofline, measured proportions and a straightforward three-post configuration.
Southern Shademaker Non-Insulated Flat Pan System
Southern Home Improvement Center (SHIC) installed a Southern Shademaker heavy-duty flat pan system manufactured with 0.032 aluminum panels. The non-insulated construction forms a solid overhead cover with a low-profile appearance suited to this outdoor area.
For this installation, no fan beams were included. Keeping the underside free of additional fan-beam sections supports the simple finished layout visible across the patio area and places the focus on the Ivory panels, edge finish and structural support lines.
Full Gutters, Finished Valances and Aluminum Support Posts
A full gutter system was included along the edge of the new patio cover. With a solid overhead flat pan surface, the gutter system provides a defined route for runoff at the perimeter of the installation.
Finished valances complete the visible roof edges and reinforce the coordinated Ivory appearance of the structure. Below the cover, three 3 in. x 3 in. extruded aluminum posts provide the specified support arrangement for the completed project.
These components give the installation a finished exterior presentation with consistent lines from the roof edge to the supporting posts below.
Ivory Finish for a Residential Outdoor Addition
The Ivory finish is one of the defining details of this Lacombe patio cover project. Its light neutral tone coordinates the panels, edge trim, gutter system and posts within one consistent exterior palette.
At approximately 171 square feet based on the stated dimensions, the completed cover creates a clearly defined outdoor area beside the home while maintaining a restrained residential profile. The addition follows the footprint of the existing slab and provides a finished overhead structure for the space.
The result is a compact aluminum patio cover built around the dimensions, layout and visible exterior character of this specific Lacombe home.
Completed Patio Cover Project in Lacombe, Louisiana
This completed project features an Ivory Southern Shademaker heavy-duty non-insulated flat pan aluminum cover measuring approximately 9 ft. x 19 ft. The installation includes three extruded aluminum support posts, a full gutter system and finished valances, with no fan beams included in the completed layout.
Southern Home Improvement Center (SHIC) installs aluminum patio covers for homeowners in Lacombe and surrounding Northshore communities. Dimensions, panel types, finishes and structural details are planned according to the property and the intended use of the outdoor area.
Request a Free Patio Cover Estimate in Lacombe, LA
Planning a covered outdoor area for your Lacombe home? Southern Home Improvement Center (SHIC) installs custom aluminum patio cover systems with attention to dimensions, finish, structural details and completed appearance. Complete the form at the bottom of the page or call the Slidell / Northshore office to request a free estimate for your patio cover project.