Close

Roof Replacement & Installation in Baton Rouge, Louisiana

Baton Rouge roofing lives through triple-digit heat indices, sudden afternoon downpours, and the occasional tropical system. That’s why a generic re-roof won’t cut it. You need roof replacement in Baton Rouge that’s tailored to our storm patterns, brick wall tie-ins, and vent-heavy attics — installed by a local crew that documents every step and stands behind the work. At Southern Home Improvement Center (SHIC), we deliver code-compliant roof installation in Baton Rouge with transparent scopes, tidy job sites, and warranties you can actually register.

We begin with a photo-documented inspection and a line-item proposal you can read without a translator. If you want a baseline before we visit, review our in-depth cost of a new roof in Louisiana guide — then book a roof inspection so we can size your project correctly.

Baton Rouge roof replacement — architectural shingles with sealed deck, upgraded starters, and ridge ventilation by Southern Home Improvement Center

What makes Baton Rouge roofs different

Baton Rouge homes mix steep gables, brick chimneys, and low-slope porch tie-ins — all pressure-tested by Gulf rain. That creates three design priorities: water management, wind hold-down, and attic health.

  • Water management starts at the deck — sealed seams, full-field synthetic underlayment, and leak barriers where wind drives rain sideways.

  • Wind hold-down means upgraded starter strips at eaves and rakes, proper fastener patterns, and hip/ridge components rated for our gusts.

  • Attic health requires balanced ventilation and clean flashing transitions at every roof-to-wall — especially on brick.

These aren’t “nice-to-haves” — they’re why a Baton Rouge roof lasts through summer and storm season.

Roofing systems we recommend for the Capital Region

Every home and slope is different — we match the assembly to roof pitch, shade, and budget, and we register your warranties when the job is complete.

Architectural asphalt shingles

Modern laminated shingles deliver balanced curb appeal and value. We pair them with upgraded starters, hip/ridge components, and high-wind nailing patterns for better hold-down.

Impact-resistant shingles (Class 3/4)

Reinforced mats help against hail and debris. Class 4 options can improve longevity and, in some cases, insurance outcomes — we’ll outline differences during your estimate.

Standing seam metal roofing

Excellent wind performance, long service life, and crisp lines. Ideal for shedding heavy rain quickly on steep slopes and sun-baked exposures.

Low-slope membranes for porches/additions

Where shingles won’t work, we install modern membranes with proper edge metal, drains, and sealed terminations — clean detailing that stays watertight.

Whichever system you choose, we replace compromised sheathing, correct old shortcuts, and color-match accessories so the finished roof looks intentional — not pieced together.

Our Baton Rouge install standard — step by step

A clear process keeps projects on time — and your property protected.

  1. Inspection & estimate — photos, moisture notes, and a line-item scope you can approve without surprises.

  2. Deck prep — replace soft OSB/plywood; ring-shank or better fasteners for attachment; straighten eaves for clean drip-edge lines.

  3. Underlayments — synthetic field layer; leak barrier at eaves, valleys, penetrations, and roof-to-wall transitions.

  4. Flashing & ventilation — new step/chimney/apron flashing (no tar “repairs”), baffled ridge vents with matched intake, sealed bath/laundry vents.

  5. Shingle/metal installation — manufacturer patterns for wind rating; woven or metal-lined valleys chosen to suit pitch and water volume.

  6. Detailing & cleanup — color-matched accessories, magnetic nail sweep, protected landscaping, and haul-off.

  7. Final walk-through — punch list closed, warranty packets registered, and a care guide for storm season.

This standard isn’t marketing — it’s how we deliver consistent results across Mid City, the Garden District, and newer builds off Highland.

Optional FORTIFIED™-style upgrades for storm days

Want more margin in a blow? We can integrate select FORTIFIED™ Roof elements — sealed roof deck, enhanced deck attachment, reinforced edges, and ventilation tuned to your attic volume. These details help under wind-driven rain and can reduce repairs after a tropical event. If your issue followed severe weather, see our storm damage roof restoration flow — we’ll document conditions properly.

Signs you’re beyond repair

Before we recommend replacement, we rule out simple fixes. When these show up together, it’s time.

  • Shingles curling or cracking — with granules washing into gutters after each storm.

  • Recurrent leaks at chimneys, skylights, or porch tie-ins — especially on brick transitions.

  • Hot attic and musty odor — a tell for poor ventilation that’s cooking the deck.

  • 15–20+ years on existing shingles or unknown install quality — common in resale homes.

  • Soft spots on the deck — or sagging lines across a valley after heavy rain.

If any of this sounds familiar, schedule a free roof estimate in Baton Rouge — we’ll confirm with photos and give you options instead of guesses.

Permits, codes, financing, and warranties

We coordinate parish permitting when required and build to manufacturer specs so your warranties are valid. Financing is available with clear terms — no teaser rates buried in fine print. You’ll get registered manufacturer coverage plus SHIC workmanship protection, all documented at handoff so you know exactly what’s covered and for how long.

Service area and scheduling

We serve Baton Rouge and nearby communities across East Baton Rouge Parish and the wider Capital Region. If you’re within a reasonable drive, we likely cover you — ask and we’ll confirm availability the same day. Lead times vary with weather and workload, but we map staging, dry-in strategy, and cleanup windows into your written scope so your week isn’t upended.

FAQ — Baton Rouge Roof Replacement & Installation

Homeowners often have the same practical questions. Below, quick answers — and we’re happy to go deeper during your estimate.

How long does a typical roof replacement take in Baton Rouge?
Most single-family homes finish in 1–2 workdays once materials are on site — weather permitting. Complex roofs, deck repairs, or multiple skylights can extend the schedule. We’ll map timing in your written scope during the roof inspection.

What’s included in the free estimate?
A photo-documented inspection, a line-item proposal you can actually read, and options for architectural shingles, impact-resistant shingles, or standing seam metal — plus any code-required items like ventilation, flashing, or leak barriers.

What drives the price the most?
Roof size and pitch, layers to remove, chosen material, number of penetrations (chimneys, vents, skylights), porch tie-ins, and deck repairs. For a baseline before we visit, see our cost of a new roof in Louisiana guide.

Do you work during summer storms and hurricane season?
Yes — with strict weather windows. We stage materials, dry-in sections the same day, and won’t remove more roofing than we can re-dry before rain. If a tropical system approaches, we pause and resequence your project for safety.

Can you help with insurance claims after storm damage?
We document conditions with photos and measurements, meet the adjuster when needed, and ensure the approved scope meets code and manufacturer specs. Start here if you’ve had a storm event: storm damage roof restoration.

What shingle grade should I choose — standard architectural or impact-resistant?
Architectural shingles deliver great value and curb appeal. If you’re under trees or want extra durability, Class 3/4 impact-resistant shingles add reinforcement for hail and debris. We’ll show side-by-side costs and warranty differences.

Do you replace flashing, vents, and rotten decking?
Yes. We install new step, chimney, and apron flashing (we don’t reuse tarred metal), new boots/vents as needed, and we replace compromised sheathing. Proper drip edge and starter/ridge components are standard — not “extras.”

How do you handle attic ventilation in our climate?
Balanced intake and exhaust are critical in Baton Rouge heat. We size ridge vents to your attic volume and confirm continuous soffit intake. Improved airflow lowers deck temperature and moisture — protecting shingles and the structure.

Metal roof or shingles — what fits Baton Rouge best?
Both work. Shingles excel for cost-to-appearance ratio and neighborhood fit. Standing seam metal offers crisp lines, long service life, and excellent wind performance — especially on sun-baked, steep slopes. We’ll recommend based on your pitch, shade, and budget.

Do I need a permit or HOA approval?
We follow parish permitting requirements and provide any documents your HOA requests — scope, color samples, and insurance certificates. We schedule inspections to avoid delays and keep your project moving.

What warranties do I get?
You’ll receive registered manufacturer material coverage and SHIC workmanship protection — both documented at handoff. We also provide care guidelines so your warranties stay valid over time.

Can I live in the home during replacement?
Absolutely. We protect landscaping and walkways, manage debris with on-site haul-off, and use a magnetic nail sweep each day. Expect some noise 7:30am–5:30pm — we coordinate around pets, gates, and parking.

How soon can you start, and how long is the quote valid?
Lead times depend on weather and workload — typically 1–2 weeks for standard systems once you approve. Quotes list a validity window so pricing and supply don’t surprise you.

Do you offer financing?
Yes — straightforward options with clear terms and no “gotcha” rates. Ask your estimator to include monthly payment scenarios with your proposal.

Ready to plan your project

A roof is more than shingles — it’s how your home manages water, wind, and heat day after day. Our approach is simple: design for Baton Rouge weather, install to a written standard, and back it with documented warranties and easy local support. Call the local line that fits your address — Baton Rouge — (225) 766-4244 — or, if you’re on the Northshore or New Orleans side, use Slidell/Lacombe — (985) 643-6611, Mandeville/Covington — (985) 626-3755, New Orleans/Jefferson — (504) 833-1835, or Gulf Coast — (228) 467-7484. We’ll inspect, document your roof with photos, and lay out clear choices — architectural shingles or standing seam metal — with clean staging, precise scheduling, and warranties that make sense for Baton Rouge weather.